Rapid Wheel Alignments. For Any HD Vehicle.
Fast, Accurate, Easy
Our quickest wheel aligner. Meaure a 4-axle vehicle in less than 5 minutes.
Measure all axles of a vehicle in minutes with a 180 degree roll.
Easy to use, quick to master. I-Track makes wheel alignment easy.
Measure and adjust truck, bus, trailer, van, and special vehicles likes cranes.
Speed Without Compromise
Simple procedures, live adjustments, print-outs and calibrations.
The drive-through design delivers rapid measurements for all axles.
High speed, wireless rotating laser heads with built-in calibration control.
What can the I-Track Measure?
Rapid Workflow
Designed for high throughput. Capture all axle measurements in minutes with a seamless, drive-through process.
Get your Tailored Quote
No obligation - quick turnaround. Alternatively, call us on 01904 460 581.
Want to see it first? Arrange a demo
Built for Speed
From intuitive software to precision clamps, every element of the system works together to deliver rapid alignment results.
Simple to use yet packed with features, Homebase 4 streamlines every stage of the alignment process.
Follow a clear, structured sequence that keeps every alignment quick and accurate.
View alignment changes in real time for precise and efficient adjustments.
Quick built-in calibration keeps every measurement accurate and consistent daily.
Create professional before-and-after printouts or digital PDF alignment reports.
Dedicated twinsteer function ensures precise readings on dual-steer vehicles.
Use default specifications for vehicles or create your own for red and green measurements.
I-Track gives you a choice of 3 types of wheel clamps. Choose one or combine them.
Magnetic scratch-free wheel connection for set stud patterns. Both long and short legs.
Universal wheel clamps for 16″–24″ steel and aluminium rims.
Clamps for smaller steel and alluminium wheels. 14" to 21".
Fully calibratable heads built for precision and reliability in demanding workshop conditions.
Reliable wireless operation gives full freedom of movement around any vehicle.
Easily recalibrated to maintain long-term precision and consistent measurement accuracy.
High speed rotating lasers give instant live readings.
Smart angle detection for advanced alignment measurements.
Configure your I-Track to suit your workshop. Dedicated workbay or mobile target scales.
Permanent workbay setup with in-ground poles. Min 3.5m x 15m.
Above or in-ground anchorings for target scales in a fixed workbay.
Moveable target scales that position around the vehicle in any workbay.
Heavy-duty turn plates with a low-profile design allow easy drive-on and drive-off operation.
Six-ton capacity plates built to handle the heaviest commercial vehicles with total reliability.
Drive on and off smoothly with a slim, stable design that fits any alignment bay.
Hard-wearing construction designed for daily workshop use and long-term performance.
Choose a mobile cabinet or mobile carry case to keep every component organised, protected and ready when you need it.
Keep your Cam-aligner system organised and protected in a dedicated mobile storage cabinet.
Every component has its place, making setup and packing quick, tidy and efficient.
Portable storage for technicians on the move — transport and protect your equipment with ease.
Choose a mobile cabinet or mobile carry case to keep every component organised, protected and ready when you need it.
Keep your Cam-aligner system organised and protected in a dedicated mobile storage cabinet.
Every component has its place, making setup and packing quick, tidy and efficient.
Portable storage for technicians on the move — transport and protect your equipment with ease.
The Upgrade Kit comes with a mobile carry case to keep every component organised, protected and ready when you need it.
Portable storage for technicians on the move — transport and protect your equipment with ease.
Every component has its place, making setup and packing quick, tidy and efficient.
Heavy duty storage case for protecting cameras and marker boards.
A mobile cabinet to keep every component organised, protected and ready when you need it.
Keep your I-Track system organised and protected in a dedicated mobile storage cabinet.
Every component has its place, making setup and packing quick, tidy and efficient.
Opt for wall panels for a more professional quick-access layout.
A mobile cabinet to keep every component organised, protected and ready when you need it.
Keep your Laser AM system organised and protected on a dedicated mobile storage cabinet.
Durable case for Josam Lasers keeping lasers protected from damage and dust.
Opt for wall panels for a more professional quick-access layout.
What’s in the Kit
Workbay Dimensions
Dedicate one or more places in the workshop to wheel alignment and perform alignments. Or use mobile target scales.
"In the first five years we expect to achieve vehicle and labour cost savings amounting to approximately 4.5 times our capital outlay – with an initial return on investment in just 15 months."
"The payback period worked out at 2.5 years, so it was an absolute no-brainer for us."
"The time-savings with the rolling method has allowed me to double my output on a daily basis compared to the laser system particularly on twin-steered vehicles."
Return on Investment
Calculate your return on investment / pay-off period in years using the Josam I-Track.
AES APPROACH
AES offer a free, on-site or training centre demonstration of all Josam alignment systems.
OEM certified wheel alignment install and training, covering measurement and adjustment.
Aftersales support including servicing, calibrations and remote Whatsapp/Facetime support.
Book a Demonstration
No obligation - quick turnaround. Alternatively, call us on 01904 460 581.
Still not sure? Request a callback
Product Information
Optional Extras
FAQS
Take a look at our FAQs below, if you can't find the answer you're looking for, please don't hesitate to get in touch with us. You can reach us by email at info@aesuk.com or give us a call at 01904 460 581.
Can I arrange a demonstration of the I-Track?
What support does AES UK provide?
Can the I-Track system be recalibrated?
Is the I-Track system OEM approved?
How long does an alignment take with I-Track?
Can I use the I-Track outdoors?
Is the I-Track system mobile or fixed?
What vehicles can be aligned with the I-Track?
How does the I-Track work?
What is the Josam I-Track system?
Why Choose Josam?
Josam equipment uses the centreline approach ensuring every axle is aligned accurately.
Each wheel is compensated for using rolling or jacking ensuring greater accuracy.
Josam technology holds multi-OEM approvals and is used on OEM production lines globally.
Measure All Wheel Angles
Heavy Duty Wheel Alignment System - Josam I-Track
Heavy Duty Wheel Alignment System – OEM Accuracy for Trucks, Buses and Trailers
The Josam I-Track is an advanced heavy duty wheel alignment system engineered for maximum speed, precision and efficiency. Using high-speed rotating laser sensors, I-Track measures full vehicle geometry as the vehicle drives through the system. Designed for busy workshops and fleet operators, it delivers instant, repeatable results with minimal setup time.
Precision, Speed and Real-Time Measurement
The I-Track’s laser-based technology captures alignment data in real time, providing immediate feedback for technicians. Its high-speed rotating laser sensors are fully calibratable, ensuring long-term accuracy and reliability. Vehicles can be measured quickly, reducing bay downtime and increasing workshop throughput.
Fixed or Mobile Configurations
Available in both fixed and mobile setups, the Josam I-Track adapts to your workshop layout. The fixed installation uses in-ground poles and marker boards to create a dedicated alignment bay for continuous, high-precision operation. The mobile system uses portable target scales positioned around the vehicle, offering full drive-through flexibility inside or outside the workshop.
Built for Productivity and Performance
The I-Track enables full axle geometry checks in minutes, making it ideal for workshops handling high vehicle volumes. Its durable, low-profile design allows easy drive-on operation for trucks, buses and trailers, while real-time measurement data ensures every alignment is accurate, efficient and traceable.
Integrated Software and Reporting
The system connects seamlessly to Homebase 4 software, allowing users to view, record and print complete alignment reports. Operators can perform quick checks or full geometry assessments, view live readings, and export professional before-and-after documentation with ease.
Supported by AES UK
Designed and manufactured by Josam, the I-Track combines cutting-edge Swedish engineering with full UK support from AES UK, the official distributor and service partner. AES provides nationwide installation, calibration, training and aftersales care, ensuring your system remains accurate, compliant and fully operational.
Why Choose the Josam I-Track
- Rapid drive-through alignment process
- High-speed rotating laser sensors with calibratable precision
- Real-time measurement
- Fixed or mobile configurations for any workshop layout
- Durable, low-profile design built for heavy-duty use
- Seamless integration with Homebase 4 software
- Backed by full AES UK installation, training and calibration support
The Josam I-Track is the ultimate solution for workshops and fleet operators who demand speed, accuracy and efficiency from their heavy duty wheel alignment system — delivering instant results, OEM-approved precision and long-term reliability.